Pharmaceutical Pro Freeze Dryer
Pharmaceutical Pro Freeze Dryer
Key Elements and Advantages
– The freeze dryer has inherent insight. It consequently and impeccably deals with the freeze drying process
– The ideal vacuum pressure and drying temperature is kept up with for every material — jam newness and strength
– 10.25 square feet of plate space — almost two times the limit of Reap Right’s standard Huge freeze dryer
– Rack Unit Has racks for 8 plate (every plate 9″ W x 20.5″ x 0.75″ H)
– 6 liters of ice limit
– Weight: 150 lbs.
Guarantee
long term restricted guarantee
Aspects
Generally speaking item aspects: 20.25″ W x 23.75″ D x 30.75″ H
Ideal for a ledge, truck or table.
Power
110 volt (NEMA 5-20) outlet. A devoted 20 amp circuit is required.
Transporting Data
– The huge freeze dryer ships in a single bundle with a complete load of 253 lbs.
– Thing will be conveyed to actual addresses, no PO boxes.
– One Freeze Dryer Bundle: 29″W x 38″D x 48″H
Upkeep
Basically channel and supplant oil. Requires a couple of minutes.
Vacuum Siphon
Each vacuum siphon has been processing plant tried to ensure 25 microns (25,400 Microns = 1 Inch of Hg) or better, and recorded CFM execution.
Vacuum Pump Technical Specifications
Oil: Robinair Premium High Vacuum Pump Oil or JB Industries Black Gold Vacuum Pump Oil Only
DC Motor
Energy Efficient
Voltage: Standard, 115v, 60Hz
Dimensions: 16.3″ x 6″ x 12.1″
Weight: 32lbs
Noise: 52 decibels
Product Comparison
Industrial Oil Pump vs Standard Oil Pump
Pharmaceutical Pro Freeze Dryer
Oil Changes
This new Industrial Pump rarely needs to have the oil changed or filtered. The pump has a gas ballast feature that makes it so water does not stay in the oil. Because of this, the oil in the pump will be pristine and clear, even after 30 or more batches. You simply won’t need to change the oil until you have run 25 to 40 batches. Whereas, the oil in the standard vacuum pump needs to be changed and filtered every 4 or 5 batches (when using the new 3/8 inch vacuum hose).
Vacuum Pressure
Under cold and hot conditions the Industrial Pump will pull a deeper vacuum than the Standard Pump. Under cold conditions the difference is .05 Pascal for the Industrial Pump and .08 Pascal for the Standard Pump. Whereas, under warm conditions the difference is much greater: .05 Pascal for the Industrial Pump and 2.05 Pascal for the Standard Pump.
Hence, the Industrial Pump is especially not affected by warm, ambient conditions. When temperatures rise, it will pull a vacuum far better than the Standard Pump. The Industrial Pump is just not affected by outside heat. It pulls the same deep vacuum even when it is in a warm environment.
Noise
The Industrial Pump is substantially quieter than the Standard Pump, 52 decibels versus 64 decibels. The Industrial Pump at 52 decibels is about the same as a refrigerator.
Oil Mist Filter
Both pumps come with an oil mist filter. However, the Industrial Pump’s oil mist filter allows for no oil spray at all and it will last much longer.
Power Use
The Industrial Pump uses less power than the Standard Pump (187 watts versus 218 watts).
Amperage
Under hot conditions at ultimate vacuum pressure the Standard Pump pulls 2.1 amps while the Industrial Pump only pulls 1.7 amps. Hence, the Industrial Pump is more efficient.
Weight
Industrial Pump is easier to move around as it weighs 5 pounds less than the Standard Pump (32 lbs. versus 37 lbs.)
Life
The Industrial Pump is more durable and will last longer than the Standard Pump
WHAT’S INCLUDED
Large Pharma Freeze Dryer
Premier Vacuum Pump
Vacuum Pump Oil
Oil Filter
Stainless Steel Trays (set of 8)
Guide to Freeze Drying
Reviews
There are no reviews yet.